Showing posts with label Knives. Show all posts
Showing posts with label Knives. Show all posts

12/6/12

Gallery Show Friday night

I have a few knives being shown in a group show at Fitzgerald Jewelry tomorrow night. Stop by for a beer and check out everyone's work.

11/30/11

10/11/11

Santoku-Cleaver Hybrid...

New from the Lab...
440-C stainless steel blade.
Wine linen micarta handle
Nickel silver bolster.
Mosaic pins.

2/24/11

Acid etching Damascus

 I've been experimenting on some Damascus I'm using for knife projects with different acids to bring up the patterns. You see, when I'm grinding blades, any patterning from the folded steels disappears and I'm left with a smooth surface. Many years ago, when craftsmen first folded and forged different steels purely to improve it's functional properties, this would have been fine. But today, with the availability of superior alloys, the use of Damascus is primarily for aesthetic reasons. With this in mind, I needed to find the best way to bring out the patterns created by the forging of dissimilar metals. I've been trying a few mixtures with varied results. I tried Sulphuric acid (battery acid), Muriatic acid (swimming pool), and for these pieces, I used Ferric Chloride (copper etch mordant).
The near side steel pictured is a blend of 1085, 15-n-20 (nickel) and L6. The far side piece is just 1095 and 15-n-20. After a 40 minute bath in Ferric Chloride I got good texture and color. The other acids gave varying results of depth and color, but the Ferric seemed to give the most definition. With future use and cleanings the color will continue to change, so I find it more important to achieve a good surface texture that will become more rich and beautiful over time. The color contrast can be maintained on a show piece that gets no use, but that's not what I do. And neither do you. The natural oxidation, resulting from years of use, is where the true beauty of these pieces will come from. But for now, this is looking pretty kick ass. More to follow...

2/4/11

Gift from Mario of MB Leathers

A fellow leather worker, Mario Burkardt from Switzerland, was visiting my shop over the Holidays. I was admiring this handmade Damascus miniature of a leather working knife he was wearing, and without a second thought, he generously gave it to me as a gift. I appreciated it very much and have been wearing it ever since.
Thanks again Mario....

9/28/10

Cut Test


One of my new 7" Chef knives of 440-C stainless steel

9/12/10

Black Diamond Knife Set


This is a set of handmade Chef's knives I finished last week. Stainless steel blades, Ebony handles and a black diamond set in each one. Fully polished, razor sharp and ready to go.


I started the set with 440-C stainless steel. This is a great all-around cutlery steel with a high resistance to corrosion, and holds a razor sharp edge with proper heat-treating. These views show my initial designs cut from the steel. Here, I've done my basic shaping and grind for the blades. On the right, you can see the hollowing and taper I put in the handle area of my full-tang knives to lighten the handle and give a special taper to the spine of the blade.

The customer made one special request... that I feature a black diamond somewhere on each knife. I worked with NYC jewelery designer Itay Malkin to have 2.5 ct., square cut, black diamonds set in gold bezels upside down so the point protrudes like a spike. Once the diamonds were set in the bezels, I made notches in my blades so they could be soldered in.


I do a lot of filing and hand sanding to get just the right shape a finish. One of the blade styles I like to do is a Japanese Santoku. The one above has a 7 " blade and I ground the divots by hand before final polishing.


I made the handles from striped Ebony hardwood. Since the diamonds were set in a gold bezel, I added a layer of bright brass under the wood so it would leave a thin "gold" line leading into the bezel.

2/20/10

Minerva cleaver


I just finished this meat cleaver for a friend that's opening a new cafe' in Manhattan. I ground the blade from A-2 tool steel and the handle is oak, treated with Butcher's wax. The oak for the handle came my friend Eric, who had saved pieces of the floor of the California house he grew up in. The blade was hardened to 58 Rockwell and double tempered, then I engraved the name of the cafe in the blade.